Skip to the article
Web3 Hub

Markets, protocols and policy, reported

Archive

Everything published on Web3 Hub.

  1. zerofi bridge routes start with the asset you need

    ZeroFi connects Monero XMR with Ethereum’s zXMR token; compare the source, destination, fees, confirmation wait and redemption path before signing.

  2. Solana swap slippage: how much should you allow?

    Set slippage to cover a realistic price move, not to force a trade through: the right tolerance depends on liquidity, volatility and the amount you swap.

  3. Solana activates Alpenglow, targeting 150ms finality

    Solana activated Alpenglow on Oct. 21, targeting 150-millisecond finality; wallets need no changes, while validators and data services face protocol shifts.

  4. Three checks to make before a bridge transfer is complete

    A source-chain transaction marked successful does not prove a bridge transfer is complete; check the network, transaction details and destination status before acting.

  5. OCC leaves crypto exchanges room to offer stablecoin rewards

    The OCC's GENIUS Act rule bars issuers from paying stablecoin interest but leaves exchanges room to offer rewards, subject to case-by-case review.

  6. Why Polygon PoS withdrawals take two steps

    Polygon PoS withdrawals split the burn and Ethereum release so validators can checkpoint the Polygon block and the bridge can verify a proof before paying out.

  7. How a tron swap works from your own wallet

    A wallet-based tron swap sends tokens through a smart contract, with the wallet signing each transaction and paying any required network fees.

  8. Visa and Mesh link crypto wallets to 175 million merchants

    Visa and Mesh will let wallet users pay online and in stores from crypto or stablecoin balances across 175 million Visa merchant locations, without a separate card.

  9. Byreal in 6 Steps: Swap, Add Liquidity and Trade Markets

    Byreal’s six-step flow covers wallet setup, token swaps, concentrated liquidity and market selection, with checks on quotes, price ranges and trading risk.

  10. JPMorgan Brings JPM Coin to Ethereum for Institutions

    JPMorgan put its dollar deposit token on Ethereum on Oct. 19, adding a public network for institutional clients to move wholesale money on-chain.

  11. Fermi Swap: When to Call Directly and When to Aggregate

    Fermi Swap trades draw from a market maker’s token inventory; direct calls are simple, while aggregators can compare routes when they support the venue.

  12. QuickSwap Slippage: Set a Limit Without Overpaying

    QuickSwap slippage tolerance sets the minimum output for a swap; learn how to choose a limit that can clear without accepting needless price movement.

  13. JPMorgan brings JPM Coin deposit token to Ethereum

    JPMorgan has brought its dollar deposit token JPM Coin to Ethereum, adding peer-to-peer transfers across Ethereum and Base for institutional clients.

  14. Coinbase to power stablecoin cards for Marqeta customers

    Coinbase will provide custody, fiat conversion and Base settlement for stablecoin-backed cards issued through Marqeta, extending their existing card relationship to business programs.

  15. Starknet opens vote on independent post-quantum Layer 1

    Starknet opened a seven-day, non-binding STRK poll on exploring an independent post-quantum Layer 1, with voting set to close Oct. 22 over quantum-security concerns.

  16. Pool inventory sets cross-chain swap quotes

    Cross-chain swap quotes reflect the tokens and liquidity available on each route, so inventory, fees and slippage can matter more than a headline rate.

  17. Smart contract wallets give treasuries cross-chain controls

    Smart contract wallets let treasury teams route approvals and transfers across chains, but bridge choice, execution controls and arrival checks determine how much control they keep.

  18. When to Swap Before or After a Cross-Chain Bridge

    Swap before a bridge when the route supports the destination token and source liquidity wins; swap after when destination markets offer the better price and depth.

  19. How Cross-Chain Gateways Authenticate Mint Instructions

    Gateways authenticate cross-chain mint requests by checking signatures, source contracts, destination details and replay state; finality settings trade faster delivery for rollback risk.

  20. Treasury teams should cap cross-chain transfers by route and token

    Set transfer caps by chain, token and time window, then account for pending funds so a delayed bridge cannot quietly exceed treasury exposure limits.

  21. How Treasury Teams Reconcile Cross-Chain Swap Amounts

    Treasury teams should match each swap’s source debit to its destination credit, isolate chain and protocol fees, and preserve a transaction trail for valuation and audit.

  22. Lower Gas or More Output? Compare the Net Value

    Lower-gas swap routes can leave more value after fees, while higher-output routes can win when fees are small; compare both in the asset you will spend.

  23. Token Contract Replacements Need a Plan for Every Chain

    Replacing a token contract means deploying a new version on each chain, then migrating balances or routing future activity through a chain-specific process.

  24. Why Cross-Chain Swaps Split Across Pools

    A cross-chain swap may use several pools to improve its exchange rate, but each route adds fees, execution steps and failure points to compare.

  25. Five Steps to Buy Fractional NFT Shares on Mantle

    Buying fractional NFT shares on Mantle takes five checks: confirm the share token, bridge a supported payment asset, reserve gas, and read the vault’s exit rules.

  26. A Cross-Chain Swap Is Pending During a Network Halt: What to Do

    If a network in your cross-chain swap has halted, wait for it to resume and check the transaction on that chain before trying again. A halt can pause one…

  27. Why a destination swap can fail after a bridge

    A failed destination swap can leave bridged tokens on the receiving chain; check both transaction records and the token balance before retrying or sending funds again.

  28. Track a Crypto Transfer at Both Wallets

    A transfer is complete only when the network confirms it and the receiving wallet credits it; track the sender record, transaction ID and destination balance.

  29. How to Send Native Crypto Without a Token Approval

    Native coins move in a signed transaction, while token approvals let contracts spend ERC-20 balances; the distinction changes the steps and permissions on-chain.

  30. Why Cross-Chain Swaps Deduct Gas From Your Payout

    Cross-chain swaps may subtract destination gas from the output because the service pays the receiving chain fee; check the net amount, fee basis and quote expiry.

  31. How to Clear a Pending Mantle Bridge Wallet Nonce

    A stuck Mantle Bridge transaction usually needs a same-network replacement at the blocked nonce; clearing wallet activity alone does not cancel an on-chain transaction.

  32. Four Checks to Make on a Pending Cross-Chain Swap

    A pending cross-chain swap is a sequence of transactions. Check the source receipt, bridge status, destination execution and final token balance to find its hold-up.

  33. Read the destination amount before you bridge

    A bridge quote’s destination amount is the number to compare: check the output token, route fees, slippage floor and network costs before signing.

  34. Permit signatures can remove a separate token approval

    Permit signatures move token approval into a wallet message, letting a swap contract use it in the same transaction when the token and route support permits.

  35. Cross-chain payouts trade speed for simpler treasury settlement

    Recurring cross-chain payouts settle per payment or through treasury batches, trading recipient speed for fewer transactions and simpler destination-chain operations.

  36. What Happens When You Bridge Crypto to Another Chain?

    A bridge moves value between chains by locking, minting or releasing tokens, but timing, fees and trust depend on its design and the destination network.

  37. Bridge Stablecoins Before Paying a Cross-Chain Invoice

    Match the invoice’s network, token and amount before bridging; compare route time and fees, then verify the destination balance before sending payment.

  38. Keep Gas on Both Chains Before Your First Cross-Chain Swap

    A cross-chain swap can require gas on more than one network. Keep each chain’s native token available for the route and any follow-up transaction.

  39. Ledger details implant attack on CryptoBilis wallet sales

    Ledger says a hidden implant in CryptoBilis-sold wallets read 24-word recovery phrases and sent them over LTE; it is tightening reseller checks as the inquiry continues.

  40. Check Destination Gas Before You Bridge Crypto

    A bridge can move tokens without funding the destination network’s fees; check the delivery mode, gas token and wallet balance before you start each time.

  41. Keep SOL ready for your first cross-chain swap

    Keep SOL in the destination wallet for Solana fees, check the route’s output token and address, and leave room for account setup before signing a first cross-chain swap.

  42. Ledger says implant sent CryptoBilis wallet phrases over LTE

    Ledger says a hidden implant in CryptoBilis-sold wallets read 24-word recovery phrases from device screens and sent them over LTE, exposing funds to theft.

  43. Why Cross-Chain Swap Routes Carry Different Risks

    Cross-chain swap routes differ because each path uses different pools, chains and settlement steps, changing price impact, fees, delays and failure exposure.

  44. Mayan bridge fees vary by route for stablecoin transfers

    Mayan lists a 0.10% fee for Wormhole Swap, but stablecoin transfer costs also include network and execution fees that vary by route.

  45. How thor swap handles a BTC-to-ETH trade in one flow

    A BTC-to-ETH swap coordinates a Bitcoin sale with Ethereum delivery, combining steps that otherwise require separate transfers in one service flow.

  46. South Korea to block 27 crypto sites, including KuCoin

    South Korea approved access restrictions on 27 unregistered crypto sites, including KuCoin and BitMart, extending controls from mobile apps to websites.

  47. XRPL defends emergency XRP overflow patch after decentralization criticism

    XRPL developers defended the Sept. 25 patch after a bug could mint spendable XRP; the fix bypassed the usual validator vote to avoid weeks of public exposure.

  48. Samsung Wallet to Add USDC on Sui for Galaxy Users

    Samsung says USDC transfers are coming to eligible U.S. Galaxy users in late October, with Sui among the networks supporting wallet access for cross-border payments.

  49. XRPL fixed decade-old flaw that could mint 18 trillion XRP

    XRPL says it fixed an integer-overflow flaw in version 3.4.1 on Sept. 25; a crafted payment could have created spendable XRP, with no public exploitation found.

  50. ESMA Sets Three-Month Deadline for Non-MiCA Stablecoins

    ESMA told MiCA-authorised crypto firms to stop serving non-compliant stablecoins and gave national regulators three months to clear existing exposures.